Surfaces that are made of one of the following materials can be cladded:
• Ceramics – free of oils
• Gypsum, plaster, concrete – requires application of a Bondroll layer
• Wood
• Iron, aluminum
• PVC
Ensure that the surface to be cladded is:
• Even
• Completely dry
• Free of any dust or dirt
• Cladding panels are even
The location of the panels need to be marked with pencil, according to:
• The size of the panel
• The surface that needs to be cladded
• Location of the surface in relation to its surroundings
Ensure even distribution of the glue on the cladding surface in accordance with the following instructions:
• Cut the tip of the glue tube at a 7 mm diameter
• For wall cladding, apply glue in vertical strips at 10 cm intervals
• For ceilings, apply glue in vertical strips at 7 cm intervals
Follow these instructions carefully:
• Placement of the panel adjacent to the area of installation
• The interior part of the decorative surface should face the cladding area
• Place the panel at its exact location
• Attach the panel to the cladding surface
The panel adhesive will set within 10 minutes
Strictly ensure the following:
• Even attachment of the entire panel with a roller
• Ensure complete attachment with no air bubbles
• Do not remove/attempt to move the panel
• Remove the protective plastic wrap from the panel
For each connection and/or corner, we recommend using the following accessories:
